Automatic Profile wrapping Production Line

Automatic Profile Wrapping Production Line The PURETE Automatic Profile Wrapping Production Line is an integrated solution designed for efficient and continuous surface wrapping of various profiles, including aluminum alloy, PVC, solid wood, MDF, and particleboard profiles. The production line integrates four key processes: Automatic Separation & Feeding, Profile Wrapping, Tracking Cutting, and Automatic Unloading, enabling a streamlined production workflow with reduced manual intervention.

Photos of the Actual Equipment at the Customer's Site

TECHNICAL SPECIFICATIONS

Total Line Length
Approx. 21 m
Total Installed Power
38.2 kW
Equipment Layout Length
20750 mm
Maintenance Aisle Width
1000 mm
Operation Aisle Width
2000 mm
Feeding Direction
Right to Left

FAQ

Q1:What is a profile wrapping line used for?
A1:It is used to laminate decorative films (PVC, PET, veneer, paper, etc.) onto various profiles such as door frames, skirting boards, aluminum profiles, and decorative moldings.
Q2:What materials can be wrapped?

A2:MDF profiles,Solid wood,WPC,Aluminum profiles,PVC extrusions

Q3:What adhesive systems are available?
A3:PUR hot melt adhesive,EVA hot melt,Solvent-based adhesive.PUR is recommended for higher bonding strength and durability.
Q4:How to avoid bubbling or delamination?
A4:By controlling glue temperature, application amount, pressure alignment, and substrate preparation.
Q5:Certain substrates or materials cannot be coated with high-gloss finishes. Which can be finished with high-gloss? Which cannot?

A5:

1) Panels suitable for high-gloss: Melamine-faced panels, wood-plastic composite extruded boards, PVC foam boards, high-density MDF (recommended with hot-melt paint primer). In summary, panels must be of standard thickness with a flat surface.

2) Production environment requirements:Workshop humidity must be maintained above 45%;a dust-free workshop is essential.

3) Adhesive requirements:Transparent PETG must be bonded with transparent PUR adhesive;adhesive flow properties are critical.

Q6:What pressure setting is required for the wrapping machine's pneumatic system to meet production requirements?
A6:0.4-0.6MPA
Q7:Why are some roller mounting rods on coating machines vertical while others are horizontal? What are the differing application effects of each?

A7:The vertical rods serve as roller guide rods, used to position and secure the rollers.The horizontal rods are quick-change brackets. Once a particular profile has been adjusted, the bracket can be disassembled into separate parts and labelled. When production of that profile is required again, it can be reassembled and installed.This

saves time and facilitates operation. saves time and facilitates operation.

Q8:What is the approximate temperature range for the adhesive in the laminating machine? How many temperature settings are required?
A8:Typically, adhesive temperatures are set as follows: laminator pressure plate at 140°C, tube temperature at 130°C, and squeegee at 110°C. These settings must be adjusted according to the specific properties of each adhesive. They should also be determined based on the ambient temperature during production and the heat resistance of the film.

Contact Us

fill in our contact form.

We will get in touch with you as soon as possible.

×
Leave a message