PURETE
a1
a1-b

language
English Русский العربية Español Deutsch Tiếng Việt Indonesian Polski Dutch Português Türkçe
Home Production line Wrapping production line
B3 Profile folding machine line

This equipment is mainly used to make grooves in the surface treatment of veneer boards (at present, mainly for the pasted PET boards) - spray glue - core boards - bending and molding.


B3

Roller coating production line Curtain Coating Production Line Spraying painting production line Inert coater production line PUR laminating production line Wrapping production line Short-cycle press prodution line Soft-touch(excimer)coating production line

CONFIGURATION INTRODUCTION

B3
FBF-66-L Wide sheet wrapping machine
When the sheet moves according to the conveying direction, the special gluing device will spray and scrape the PUR hot melt adhesive or ordinary hot melt adhesive on the back of the wrapping material, simulating the manual laminating action, and then the surface decorative material will be adhered to the surface of the substrate through the point-by-point crushing by the pressure rollers and the molding wheels, so as to realize the composite work of the two.
B3
FBF-33-L Section bar wrapping machine
When the profile moves according to the conveying direction, the special gluing device will spray and scrape the PUR hot melt adhesive or ordinary hot melt adhesive on the back of the wrapping material, simulating the manual laminating action, and then the surface decorative material will be adhered to the surface of the substrate through the point-by-point crushing by the pressure rollers and the molding wheels, so as to realize the composite work of the two.

Leave a message

b40